Sandblaster Resume Sample
Madilyn Weimann
84690 Una Unions,
New York,
NY
+1 (555) 412 3255
Work Experience
Sandblaster
02/2017
-
PRESENT
San Francisco, CA
- Frequent standing, bending over and lifting up to 25 pounds
- Manufacturing work environment, subject to seasonal temperatures
- Use of blast cabinets and machines, rotary machines, aluminum oxide and vibratory
- Loads parts into sandblast equipment and operates in accordance with prescribed method in order to remove surface contaminants and imparts proper surface finish
- Maintains adequate supply of blast sand in hopper
- Obtain and load sand in machines
- Detects and reports defective items and unusual conditions to proper supervision. Maintains work area and equipment in a clean and orderly condition
- Performs a variety of other tasks of equal or lesser complexity as assigned by supervision or as required by position
- Maintains production rate with acceptable quality
Sandblaster CC
01/2014
-
08/2016
Houston, TX
- Trains lower classified personnel
- Sand blasts castings following established methods and procedures. Requires the use of some judgment to obtain correctly cleaned surface. Checks work visually, makes minor decisions
- Moderate physical effort handling parts. Equivalent to frequently exerting average effort. Moves castings weighing 25-150 lb
- Able to read and comprehend English
- Able to add and subtract two digit numbers and to multiply and divide with tens and 100s
- Able to lift and carry up to 50 lbs. occasionally
- Able to read and interpret documents, such as safety rules, operating and maintenance instructions, and procedure manuals
- Near vision requirement is Jaeger J1 in on eye, at no less than 12 inches; or equivalent, or Jaeger J2
- Prepare, set up, and test all paint spraying equipment prior to use to make sure all equipment is in working order
Sandblaster, WG
05/2007
-
07/2013
Phoenix, AZ
- Surface preparation to abrasive blasting standards
- Apply surface materials when required to fill any surface imperfections. Inspect surface condition of substrate prior to coating and report any irregularities to immediate supervisor
- Select and use various types of hand tools, abrasive sandpapers, and grinders
- Understand and be able to recognize surfaces for painting readiness including the presence of grit
- Prepare and sandblast parts to blueprint specifications
- Blast variety of products following procedures
- Preparation/masking for blasting and painting
- Assist Painter in handling and preparation for painting
Education
Shawnee State University
2001 - 2006
School's Degree in Painting
Professional Skills
- Basic Painter Skills for cross-training
- Knowledge to operate, control and perform preventive maintenance features of automatic blasting bays, nozzle blasting chambers, nozzle blasting booths etc
- Experience blasting on tugs, barges, or ships on drydock or graving docks
- Experience setting up blast hoses, dead man cord and breathing air lines
- Experience sandblasting hulls and decks to an SP6 or SP7 standard
- Experience blasting with copper slag, coal slag, garnetorsteel grit
- Operate an aerial boom lift while blasting
How to write Sandblaster Resume
Sandblaster role is responsible for insurance, manufacturing, training, government, compliance, planning, education, water, basic, air.
To write great resume for sandblaster job, your resume must include:
- Your contact information
- Work experience
- Education
- Skill listing
Contact Information For Sandblaster Resume
The section contact information is important in your sandblaster resume. The recruiter has to be able to contact you ASAP if they like to offer you the job. This is why you need to provide your:
- First and last name
- Telephone number
Work Experience in Your Sandblaster Resume
The section work experience is an essential part of your sandblaster resume. It’s the one thing the recruiter really cares about and pays the most attention to.
This section, however, is not just a list of your previous sandblaster responsibilities. It's meant to present you as a wholesome candidate by showcasing your relevant accomplishments and should be tailored specifically to the particular sandblaster position you're applying to.
The work experience section should be the detailed summary of your latest 3 or 4 positions.
Representative Sandblaster resume experience can include:
- Maintain equipment and area in good, clean, safe and operational condition
- Operates the sandblast machine from outside the sandblast cabinet
- Safely operates all equipment and tools
- Related experience is required
- Operate sandblast equipment
- Operate cranes and forklifts to maneuver large parts
Education on a Sandblaster Resume
Make sure to make education a priority on your sandblaster resume. If you’ve been working for a few years and have a few solid positions to show, put your education after your sandblaster experience. For example, if you have a Ph.D in Neuroscience and a Master's in the same sphere, just list your Ph.D. Besides the doctorate, Master’s degrees go next, followed by Bachelor’s and finally, Associate’s degree.
Additional details to include:
- School you graduated from
- Major/ minor
- Year of graduation
- Location of school
These are the four additional pieces of information you should mention when listing your education on your resume.
Professional Skills in Sandblaster Resume
When listing skills on your sandblaster resume, remember always to be honest about your level of ability. Include the Skills section after experience.
Present the most important skills in your resume, there's a list of typical sandblaster skills:
- Language Skills - Ability to read and understand complete sentences in English
- Effectively present information in one-to-one and small group situation to customers, clients, and other employees in the organization
- Field experience or related experience
- Field experience or related experience
- Set up, prepare, operate, regulate and maintain complete stationary and portable sandblasting equipment
- Maintains equipment in good working order and maintain a clean work area
List of Typical Experience For a Sandblaster Resume
1
Experience For Sandblaster B Resume
- Train new employees in sandblasting operations as required
- Removes shell, scale, grinding marks and other material from castings
- Spray Airless Painting
- Visually inspects the part to ensure that all specifications are met
- General assist with others in department
- Cleans grease and dirt from surfaces to be coated/painted
- Able to determine weather and damage resistance to various coatings and paints
2
Experience For Sandblaster CC Resume
- Coats areas inaccessible to hand sprayer with brush or other means
- Knowledge of lead and zinc abatement
- Knowledge of lead and zinc abatement hazards and mitigations
- Immediately report all Incidents/Accidents, no matter how small, to their Supervisor
- Responsible to participate in the safe application of industrial coatings to a variety of new and older mobile oilfield service equipment using standard and/or non-standard tools, equipment, and procedures. Using considerable judgment to ensure quality and/or proper procedures are used
- Brings technical problems encountered to the Lead Hand’s attention for resolution throughout the project
- Manually directs nozzle for blast at parts
3
Experience For Sandblaster Paint Room Resume
- Masks specified areas that need to be protected from abrasives
- Examines finished parts to specifications
- Adjust controls on equipment to regulate pressure and amount of abrasive blast, and load parts onto table
- Shovels or pours abrasives, and shovels abrasive into hopper
- Verifies lot and part identification
- Loads castings into shotblast cabinet; adjusts air pressure
- Visually inspects sandblast parts to verify removal of materials and uniform color of parts
4
Experience For Sandblaster, WG Resume
- Adds sand to machine as needed
- Adheres to plant and department safety rules
- Read, follow and interpret instructions on Technique Cards
List of Typical Skills For a Sandblaster Resume
1
Skills For Sandblaster B Resume
- Operate Sandblaster, shovel, placement racks
- Standing, walking, carrying, bending, lifting 50 lbs. eight hours a day
- Smooth surfaces and remove old paint from metal surfaces to prepare for painting. This is done through scraping or using sandblasting equipment
- Knowledge of steam cleaning and water blasting process
- Seasoned in safely operating power tools
2
Skills For Sandblaster CC Resume
- Maintain a safe, neat and clean work area by adhering to Warehouse safety regulations
- Able to clean while working, open cases and remove debris from Warehouse areas as needed
- Assist in building a positive and productive work environment
- Knowledge of sandblasting procedures and abrasives for large structures arid objects or small and intricate items of metal and nonmetal item
- Prepare sandblasting bays, charters, booths, etc
3
Skills For Sandblaster Paint Room Resume
- Protect surfaces that are not to be blasted with appropriate masking material
- Read and respond to oral or written sandblasting instructions, work orders, shop manuals and safety rules
- Determine the technique and extent of blasting required such as hone, brush, shot, sweep and spot
- Wear protective clothing and follow safety procedures as outlined
- Driver’s License and an acceptable driving record for the past three (3) years to be eligible under company vehicle insurance policy
- Lift up to 50 lbs consistently and stand for up to 10 hours
4
Skills For Sandblaster, WG Resume
- Open to work overtime
- Set up blast pot/hopper, compressors, aftercooler
- Able to work independently, as well as in small teams in the Warehouse
- Walk and stand throughout shift
- 2nd Shift position - hours are 3:30pm to Midnight
5
Skills For Steel Sandblaster Resume
- Knowledge of the characteristics of brass, corrosion resistant steel, aluminum, iron, steel, monel and other metals or nonmetal items
- Knowledge of dry and wet blast processes
- Identify composition of surfaces and determine proper abrasive or combination of abrasives
- Regulate-nozzle orifice for proper pressure of air or vapor to avoid warping or damaging items or surfaces and protect surface not to be blasted with masking tape
- Apply proper methods and techniques of blasting such as nozzle distance from surface, duration of blasting, angle of blast and positioning work pieces
- Regulate the nozzle orifice for the proper pressure of air to avoid warping or damaging items or surfaces
- Select nozzles for the type of blasting with proper offsets for reaching behind objects
- Apply operating and maintenance manual instructions to maintain equipment
6
Skills For Industrial Sandblaster Resume
- Apply the proper methods and techniques
- Maintain hoses, nozzles, valves and other equipment in accordance with maintenance manuals
- Perform general maintenance on equipment
- Understand and follow company and customer specifications
- Regulate controls associated with all equipment utilized
7
Skills For Sandblaster Resume
- Current Alaska Hazardous Painters Certification required
- Other applicable certified designations
- Mathematical Skills – Ability to add and subtract two digit numbers and to multiply and divide; ability to perform these operations using US weights, measurements and volume
- The ability to use airless spray guns equipment is required
- Read, write and understand simple instructions, short correspondence and memos
- Certificates, Licenses or other Registrations
- Fill nail holes, cracks, and joints with caulk, putty, plaster, or other filler
8
Skills For Sandblaster B Resume
- Prepare and follow required paper work (i.e., paint logs, PO’s)
- Read, write and speak English; simple mechanical equipment
- Focus on specific jobs, follow instructions
- Manually abrades surfaces of metal or hard composition objects to remove adhering scale, grease, tar, rust, and dirt, and to impart specified finish, while using sandblasting equipment. Sand blaster has a high pressure nozzle that is equivalent to 60pounds of weight. This is to ensure uniform look and to meet planning specifications
- Shovels or pours sand into machine. Also, when finished, shovel or pour sand into appropriate recycling areas to clean area. This is to ensure safety and cleanliness
- Load parts on racks in enclosed rooms. Turn valves on equipment to regulate pressure and composition of abrasive mixture flowing through nozzle. This is to ensure that the position of the metal is easy to work with and the equipment is at the right setting
- Painting – occasionally mixing paints, operating painting equipment including pumps and guns
- Material preparation – masking, blowing, sanding and preparing components
9
Skills For Sandblaster CC Resume
- Abrasive blasting – operating abrasive blasting equipment to prepare components for paint. Both booth style and cabinet blasters
- Proficient in operating and set up of sandblasting machine and equipment
- Knowledge of various coating and painting applications
- Knowledge of blending and mixing, and application various epoxy coatings and paints
- Able to monitor and maintain the correct atmosphere for applying and curing various coatings and paints
- Sandblasts parts in cabinet by directing hand-held nozzles; uses different sized pipes and nozzles, depending on part
- Performs minor equipment maintenance, including changing hoses and nozzles
- Keep area and surrounding area clean and safe to meet and pass safety regulations
- Removes rust from metal surfaces with sandblasting equipment
10
Skills For Sandblaster Paint Room Resume
- Able to determine the correct sandblasting abrasive in order to achieve the correct metal profile
- Able to ensure a uniform surface finish to avoid damage from over blasting
- Able to inspect completed sandblasting surfaces to ensure conformance to metal surface preparation specification
- Able to select and use the proper PPE for sandblasting
- Select and apply the correct masking material
- Ensure proper storage and preservation of coating and paint on site
Related to Sandblaster Resume Samples
Labourer Resume Sample
Work Experience
• Normal setting for this job is: manual labor
• Demonstrated aptitude for safety
• The ability necessary to progress through the Lines of Progression
• Valid Alberta Driver’s License required
• Using motor coordination with finger ...
Professional Skills
• Demonstrated problem solving, planning, an...
• Strong organizational, analytical, and ora...
• Good time management skills to prioritize ...
Mill Resume Sample
Work Experience
• Working Knowledge of TPS / Lean Manufacturing practices. (A3, VSM, 5S, Kaizen Activities, etc.)
• Experienced in Continuous Improvement and strategic thinking
• Solve problems using the scientific method (PDCA, A3, etc) and coach others to solve problems
• &n...
Professional Skills
• Well-developed influencing skills sufficie...
• Management experience and proven leadershi...
• Strong communication skills, team building...
Roofer Resume Sample
Work Experience
• Knowledge of applicable building codes and their application for purposes of evaluating buildings and structures, their components, associated appurtenances, property uses and their condition
• Using various methods of troubleshooting to determine locations of roof leaks and the cause
•...
Professional Skills
• Excellent communication, leadership, inter...
• Excellent communication, analytical, leade...
• Commercial Roofing experience, residential...
Drilling Resume Sample
Work Experience
• Interface with rig contractor, operator and other service companies to improve efficiencies in drilling operations. Represent the Company and the Operator’s best interests through accurate, professional, effective, in-depth interaction with pertinent personnel by demonstrating current industry level of expertise
&n...
Professional Skills
• Strong interpersonal, customer service, ve...
• Decision making & prioritising: the abilit...
• Have had prior experience managing HPHT we...
Manager Plant Resume Sample
Work Experience
• Experience with concrete and related products
• Always present a professional appearance in accordance with the American Concrete dress code
• Answer phone in a professional manner
• Work closely with Customer Service Manager
• De...
Professional Skills
• Manage the total operation of the feed pro...
• Strong strategic thinking, problem solving...
• Demonstrate good analytical and reporting ...
Foreman Resume Sample
Work Experience
• Filling in, in absence of Horticulture Manager, supervising Operator 1 & 2, Maintenance Technicians and laborers
• Operating a variety of maintenance equipment as needed
• Supervise the upkeep and maintenance of the paint locker
• Supervise housekee...
Professional Skills
• Demonstrate good leadership skills includi...
• Demonstrated sound, assertive, positive le...
• Excellent verbal and written communication...